10
BASIC FILTER CLEANING
How to clean the Wayfarer
™
UF Cartridge after use and when the flow rate slows.
1.
After use in any dirty water, you should give
the unit a general clean. Start by removing the
UF Cartridge (as described on page 8).
2.
Rinse the outside of the filter (the white straws
beneath the blue grill) with clean water to remove
dirt and debris. Keep doing so until the water runs
clear. Be careful not to damage the filter by using
excessive water pressure.
3. Important
– keep the open-end of the UF filter
facing upward to avoid contamination and only
wash this face with microbiologically clean water.
4.
Rinse the housing and ensure all visible dirt is
removed from all components before refitting
the UF Cartridge.
