SoarFX Collection
9
CHARGE THE SURGER
• Fully charge your Surger for 12 hours before using
it for the first time. After the first charge, your
Surger should only take about 2 hours to charge
(or charge until all four green LED are lit, indicating
that the battery is at full capacity).
• To charge, connect the adapter to the charging port
and plug into wall outlet. The average run-time is 2
hours at level four and longer at lower levels.
• We recommend that you do not fully deplete the
battery to the red LED level.
TURN IT ON
• Once your Surger is fully charged, slide the Power
switch on bottom of unit to the ON position.
CHOOSE YOUR SPEED
• Press the red Speed Control button on top of unit
to toggle through 4 vibration speed levels:
• Press the Speed Control button once to set the
vibration speed to level 1. Press the button twice
to select level 2, three times for level 3, four times
for level 4.
• Press the Speed Control button five times to turn
off vibration.
• The 4 blue LED lights indicate vibration speed level
selected (on level 2, two LEDs will be lit).
3
2
1