Re Fitness Collection
11
10 RelaxaVibe User Manual Lifepro
SETUP THE RESISTANCE BAND BARS
The included resistance bands allow you
to incorporate strength training into your
workouts. They attach to the RelaxaVibe via
two metal bars which come pre-installed to
the underside of the unit. To setup the metal
bars for the resistance bands:
1. Locate the hex key and two socket-head
screws in the hardware bag.
2. Turn the RelaxaVibe upside-down and
locate the two metal bars toward the
front of the unit. See
Figure 1
.
3. Rotate each metal bar so it is hanging
over the front edge of the unit. See
Figure 2
.
4. Insert one socket-head screw through
the screw hole in the center of each bar.
5. Use the hex key to tighten the screws.
6. Turn the unit right-side up.
ATTACH THE TWO RESISTANCE BANDS
1. Insert the end of a resistance band
through one of the metal bars.
2. Thread the resistance band handle
through the loop in the band and pull
tight. See
Figure 3
.
3. Attach the second resistance band to
the second metal bar.
4
5
3
1
2
That’s it. Your Lifepro RelaxaVibe is now
ready to use.
See
OPERATING INSTRUCTIONS
on
page 12 and
CHOOSING A PROGRAM
on
page 14 for details.
ACTIVATE THE REMOTE CONTROL
1. Remove the remote control from
the silicone shell holding it to the
wristband. See
Figure 4
.
2. Remove the back of the remote.
3. Remove the round plastic insert
under the CR2032 3V battery.
4. Replace the battery and the back
of the remote.
5. Re-insert the remote into the
silicone shell.
CONNECT TO POWER
1. Insert the power cord firmly into the power jack on the side of
the unit.
NOTE:
Press forcefully until you feel a click, which indicates that the
cord is securely connected. The power cord fits tightly so it will not
loosen during use.
2. Plug the power cord into an AC outlet.
POWER ON THE RELAXAVIBE
1. Flip the power switch on the front
of the unit to the ON position.
2. Press the power button on the
control panel or the remote control.
USING THE BUILT-IN
BLUETOOTH SPEAKERS
1. Go to
Settings
, then
Bluetooth
on your
smartphone or tablet.
2. Turn on Bluetooth.
3. In the Device List, select
the device called
lifepro
.
4. Enter the password
8888
to connect to the
RelaxaVibe’s speakers.
Setup your Lifepro RelaxaVibe in just five easy steps:
Figure 1
Figure 2
Figure 3
Remote
Shell
Remote
Remote
Back
Plastic insert
Battery
Wristband
Figure 4
