ADJUSTING THE 360° SUPPORT BAR
The RelaxaTilt X has a 360° adjustable support bar which allows you to tilt
the massager to the best possible angle for your massage needs. To adjust
the angle of the support bar:
1. Press the round button on each side of the support bar at the same time.
2. Keep pressing the buttons as you rotate the support bar.
3. Release the buttons when the RelaxaTilt is tilted to the desired angle.
4. Ensure the buttons are properly locked in place before using the
massager.
MASSAGING YOUR FEET
To use the RelaxaTilt X to massage
your feet:
1. Adjust the support bar so that
the RelaxaTilt X is at your
desired angle.
2. Sit on a sofa or sturdy chair
with a back.
3. Place the RelaxaTilt X in
front of you. Ensure that the
RelaxaTilt X is positioned such
that the massage chambers
and the control panel point up and you can read the Lifepro logo.
4. Place your feet in the massage chambers in the position shown.
12
RelaxaTilt X User Manual Lifepro
Re Fitness Collection
13
CREATING A MASSAGE
You can use the RelaxaTilt X in auto mode by selecting from three preset
massages, P1–P3. Each uses varying massage speeds, rhythm, and direction.
You may also create a fully-customized massage in manual mode.
Use the control panel to begin a massage:
1. Press the
Power button
to turn the system ON. Massage will begin
automatically.
2. Press the
Auto button
to select your desired massage mode, P1–P3
(the 3 preset massages), or manual mode. Your selection appears in the
display window. The default mode is P1.
3. Press the
Time button
to toggle through the massage time durations,
5–30 minutes, in five-minute increments (5, 10, 15, 20, 25, 30). The
default massage time is 15 minutes. Your selection appears in the
display window.
4. Press the
Heat button
to turn the heat on or off at any time. When heat
is on, heat icons show on the display window. Heat is off by default. It
takes about 10 minutes to reach the full temperature of 104° – 122° F.
5. In manual mode, press the
Speed button
to adjust the massage speed,
low, medium, or high. As you increase/decrease the speed, the speed
of the blue LEDs on the perimeter of the display window will change
accordingly. The default speed is medium.
6. In manual mode, press the
Direction button
to change the massage
direction, clockwise or counter-clockwise. The default direction is
clockwise. As you change direction, the direction of the blue LEDs on
the perimeter of the display window will also change.
7. Press the
Power button
to stop the massage at any time.
8. The RelaxaTilt X will stop automatically when the set working time is
complete. Simply press the Power button to turn the system ON again.
9. Always unplug the RelaxaTilt X after each use.
NOTE:
You can adjust time, massage mode, speed, direction, and heat at any time
during a manual mode massage.
NOTE:
Massage speed and massage direction cannot be adjusted for the 3 preset
massages, P1–P3. However, the massage time and heat may be adjusted at any time.
