![Lifepro LumiCure Light Therapy Torch User Manual Download Page 5](http://html1.mh-extra.com/html/lifepro/lumicure-light-therapy-torch/lumicure-light-therapy-torch_user-manual_1909708005.webp)
8
LumiCure User Manual Lifepro
USING THE LUMICURE
• The recommended treatment time is 1–3 minutes per area. To avoid
overheating, do not use the LumiCure continuously for more than 5
minutes, and wait at least 2 minutes after 5 minutes of continuous use
before using the LumiCure again on another body part.
• Wait at least 5 hours between treatment sessions over the same body
part.
• Hold the LumiCure in position over the area being treated for 1–3 minutes.
• While the LumiCure may be used over clothing, use over clean, bare skin
for best results.
• Hold the LumiCure on the skin to treat deep pain and up to 1 inch away to
treat superficial pain.
• For best results, do not use the LumiCure after applying lotions or creams
to your skin.
• Be sure to remove any jewelry and accessories from the area to be
treated, including rings, belts, necklaces, and bracelets, before using the
LumiCure.
• Turn off the LumiCure before removing it from the treatment area to avoid
accidental light contact with the eyes.
• The battery should be removed for storage or travel.
• Use the LumiCure daily for optimal results.
IMPORTANT SAFETY INFORMATION
• Always wear the protective glasses to protect your eyes from the torch
LEDs.
• Do not use on or near the eyes or eyelids.
• Never use the LumiCure under a blanket or pillow. Excessive heat can
potentially cause fire, electrocution, or injury to people or property.
• Keep the LumiCure and accessories away from heat sources and fire.
• The LumiCure and accessories are not waterproof. Keep away from liquids,
and do not immerse in water.
• Never use the device or plug/unplug the battery charger with wet hands.
• Always power off the LumiCure after each use.
Wellness Recovery Collection
9
BENEFITS OF LIGHT THERAPY
The LumiCure offers advanced healing powers, using three, safe non-UV
wavelengths of light all at once:
630nm (red) wavelength:
• Heals wounds
• Repairs skin
850nm (near infrared)
wavelength:
• Decreases inflammation
• Relieves muscle and joint pain
• Repairs deep tissues such as muscles, joints, and organs
CHOOSING THE RIGHT TREATMENT INTENSITY/DEPTH
To adjust the depth and intensity of the treatment, hold the LumiCure at
different distances from the treatment area:
• To treat deep tissues such as muscles, joints (knees, shoulders,
elbows, ankles), and organs,
hold the LumiCure directly against the skin.
• To treat small joints, like fingers,
hold the LumiCure about a ½ inch
away from the area to be treated.
• To treat superficial pain or skin wounds,
hold the LumiCure about 1 inch
away from the area to be treated.
3-3-3 TREATMENT PLAN
Commit to a 3-week treatment plan with the LumiCure. You could see
pain-relief results sooner, or even immediately, but full benefits may not be
achieved until you have completed three weeks of treatment. Be patient
and consistent, using the LumiCure for 3 minutes per area, up to 3 times a
day, for a full 3 weeks.
Do not stop your other pain-relief treatments (especially any prescribed
medication) abruptly when you begin light therapy treatment, even when
you begin to feel results. If you feel significant improvement after 3–4
weeks of treatment, discuss future pain management options with your
doctor or therapist.
660nm (red) wavelength:
• Improves skin health
• Boosts blood circulation
• Stimulates collagen and elastin
production