Please read the operating instructions before using the FusionX.
Keep this manual for reference.
CHARGING THE FUSIONX
• Charge the battery as part of the assembled FusionX, or charge it on its
own.
• Fully charge your FusionX for 3 hours before using it for the first time.
• Full charge is indicated when the Battery Indicator LCD at
the bottom of the battery turns green.
• The Battery Indicator LCD at the bottom of the battery
changes color to show current battery level: 100% battery
is green; 40-99% battery is blue; 10-39% battery is yellow;
0-9% battery is red.
• Average run-time is about 3-5 hours (varies by speed level used).
USING YOUR FUSIONX
1. Slide the Power switch at the bottom of the handle to the ON position to
power on the FusionX.
2. Press the Speed Toggle button to begin massaging at speed level 1.
4. Press the Speed Toggle button again to toggle between the 5 vibration
speeds.
5. At the desired speed, float the head of the massage attachment along a
muscle group. Apply pressure as needed.
6. The FusionX will auto-power off after 20 minutes of continuous use. If
you wish to continuing using the FusionX, allow the unit to rest for 10
minutes, then press the Speed Toggle button to restart the unit.
7. Slide the Power switch to the OFF position to power the unit off after
each use.
REMOVING THE BATTERY
1. Slide the Power switch at bottom of handle to power OFF the FusionX.
2. Press the Battery Release tab on the side of the unit.
3. Grab the battery/handle and firmly pull down to remove the battery.
10
FusionX User Manual Lifepro
REMOVING AND REPLACING A MASSAGE ATTACHMENT
1. Slide the Power switch at bottom of handle to power OFF the FusionX.
2. Grab the inserted attachment and firmly pull out to remove it.
3. Insert the stem of a new attachment into the unit. Ensure the small
raised notch on the attachment lines up with the cutout on the nozzle of
the the unit.
4. Press the attachment in firmly to secure it.
USING HEATED MASSAGE
1. Power OFF the FusionX and remove the current massage attachment.
2. Insert the Heated Massage attachment. Ensure the small raised notch
on the attachment lines up with the cutout on the nozzle of the the unit.
NOTE:
You can only use Heated Massage with the Heated Massage attachment.
3. Power ON the FusionX.
4. Press the Heated Massage button and allow the unit to preheat for
about 10 minutes.
5. Press the Speed Toggle button to begin massaging.
6. At the desired speed, float the head of the Heated Massage attachment
along a muscle group. Apply pressure as needed.
7. If the head of the Heated Massage attachment begins to feel too hot,
press the Heated Massage button to turn OFF Heated Massage for at
least 3 minutes to allow the attachment to cool down.
SoarFX Collection
11
TIPS FOR USING YOUR FUSIONX
• Move the FusionX over desired muscle groups, about 1 minute per region.
• Apply pressure as needed; however, there should never be a need to press
very hard. The vibration pulses do all the hard work.
• Use the FusionX for 15-20 minute sessions, up to 3 times per day.
• Avoid keeping the massage head in one area for more than 3 minutes.
• Prolonged application can traumatize tissues.
