background image

OPERATING THE AIR COOLER

[email protected]

Natural: 

Natural setting provides a soft and comfortable environment with a selection of 

low, medium and high speed.

Sleep: 

When the "Speed" Mode is at high level, the sleep function will run at high-speed 

natural wind for 30 mins, then switch to medium-speed natural wind for 30 mins, and then 
keep running at low-speed natural wind. 
When the "Speed" Mode is at medium level, the sleep function will run at medium-speed 
natural wind for 30 mins, then switch to low-speed natural wind and keep running at low-
speed natural wind.
When the "Speed" Mode is at low level, the sleep function will keep running at low-speed 
natural wind.

4. Timer

Press "Timer" button to set the fan between 1-12 hours, the indicator light will show the 
selected time and the unit will operate until the preset time. Continuously press the button 
to your desired running time.
To cancel the timer, simply press the button until the indicator shows "00".

5. Swing

Press "Swing" button to change the wind direction. The swing icon will appear on the screen 
when the function is activated. Press the button again to stop the oscillation. The vertical 
direction of air flow can be adjusted manually by directing the outlet louvers up and down.

6. Cooler

Press this key to activate the air cooler function. Water pump will take the water from the 
tank and pour it onto the cooling pad. Cooling pad absorbs the heat of the water and 
evaporated air is blown out through the fan. The cool breeze by the cooler drops the 
temperature and creates a relaxing cooling effect.

Caution: 

If the water level is low or there is no water in the tank, do not activate the "Cooler" 

function. 
Check the water level first and add clean water if needed, also to replace the stale water. It is 
recommended to replace water in the tank at least once a week.

7. Auto Lights Off

If there is no operation after 1 minute, the lights on the control panel will automatically turn 
off. And press any button to turn on the lights.

Insert the plug into the electrical outlet. Press the "On/Off" button to turn the unit "ON". The 
LED indicator automatically shows the room temperature and shifts the fan to standby mode. 
The functions of the unit can be controlled via control panel or by remote.

1. On/Off

Pressing the "On/Off" button on the control panel or pressing the "On/Off" button on the 
remote control will turn the unit "ON" at intermediate speed. After few minutes, the fan will 
drop to show speed or to the pre-programmed memory setting. To switch back the standby 
mode, simply press the "On/Off" button on control panel or press the "On/Off" button on 
remote control.

2. Speed

Press this key to choose between high, medium and low fan speed. Each time the "Speed" 
button is pressed, an icon will appear on the LED screen indicating the current speed level.

3. Wind

Press the "Wind" button to choose the type. Indicator light will display the selected type of 
wind;

Normal: 

A continuous wind blow that can be adjusted to low, med and high speed.

3

4

[email protected]

Reviews: