- 18 -
- 23 -
FORCED ICE-HARVEST:
During the ice making process, press the on/off power button for three seconds, the unit
will enter the ice-harvest program in advance, and will continue to run the next ice-making
cycle after the ice-harvest is finished.
NOTE:
1. When each batch of ice fall off to the ice bin, please use an ice spoon to shovel
them into 32 small ice cubes to hold more ice.
2. It is recommended to put the extra ice cubes produced in an ice bag and store it in
the ice bin.
AUTO CLEANING FUNCTION:
After plug-in, connect the water resource, press the on/off button , the unit will enter the
automatic cleaning program, and it will automatically stop after 10 minutes. After the
cleaning program is finished, please remove the drain plug and drain the sewage.
The
transparency
of the ice
cube is not
very good or
ice cube
shape is
irregular
Improper adjustment of ice
thickness
Reset ice thickness
Water quality is bad
Ice maker water tank or the
ice tray is very dirty
Clean the ice maker and
replace the filter
Uneven water flow above
the ice tray
The shunt tube needs to be
cleaned or the unit is not level.
Too much water above the
ice tray
Tie the water pump silicone
tube
Ice cube is too thin or too
thick
Adjust ice thickness
The ice maker is not stable
and the soles of the feet
are floating
Locate the ice maker on
a stable surface
The ice maker touches
other objects
Avoid touching other objects
The door is not
completely closed
Close the door completely
Working in high
temperature and high
humidity environment
Normal
Can't take off
ice
Excessive
noise
Condensation
on the shell
Install a filter on the water
inlet pipe.
