Select one of the
available SMODs
from the drop
down menu.
Fill in the required details as indicated, and then
select one of the paired SMODs from the drop down
list (for pairing refer to section 3, Pg. 5). Click on the
Glow
button to identify the SMOD you have chosen.
Gently place the selected SMOD into the culture
flask and make sure that it is covered by the medium.
Important:
The SMOD must be fully submersed in the
culture medium.
When the SMOD is selected the battery level will be
displayed as Fully charged or NOT fully charged. To
maximise the time over which the SMOD can take
measurements, make sure to use a fully charged
SMOD.
Select a
Cell Type
i.e. bacterial or yeast cells, or enter
a custom calibration value and then click Go!
5. Set up an experiment
14
