Lifemax Wireless Solo-Call Manual Download Page 6

Safety Warnings

Wireless technology can be affected by environmental factors and can be altered when 

new equipment is brought into the local area.  The Solo-Call incorporates safety checks 

to warn of a loss of wireless signal, but these should be supplemented by regular 

manual checks.

Lifemax Sensor Mats are consumable items and should be replaced when they become 

worn or soiled.  Using an excessively worn sensor mat will reduce the effectiveness of 

the Solo-Call system.

• 

Please read the entire instructions carefully

.  Always test the units function 

and battery power before relying on the device.  If the 

battery low

 LED is 

illuminated or the alarm sound level is low, replace batteries immediately;

• This item is not a toy - small wires and long cables are potentially hazardous.  

Use with care and under supervision;

• The pager emits a loud signal - do not point directly at any person to prevent 

hearing damage; 

• This electronic product is not waterproof.  Do not submerge any component in 

liquid.  This item is for indoor use only, operation in a damp environment is not 

recommended;

• The product may be wiped clean; 

• Batteries should be removed prior to cleaning and during extended periods of 

non-use;

• This item operates at a radio frequency of 868MHz.  It requires no calibration;

• If this product will be used in the vicinity of vital medical devices including, 

but not limited to, Cardiac Pacemakers, Electronic Cardiopulmonary Devices or 

Electrographs (ECG), please test each device to ensure they do not interfere 

with each other;

• If interference from strong radio signals or power lines causes the unit to 

malfunction, steps should be taken to remove the source of the interference.  

Once removed, the device will operate correctly;

• On rare occassions, static electricity may cause the unit to malfuction and 

require it to be reset.  To reset the unit, remove all batteries for a short period 

and re-insert;

• 

The Solo-Call contains no user-serviceable parts

.  Modification of the device 

will invalidate the warranty and could cause the unit to breach product safety 

laws.  The manufacturer assumes no responsibilty for adapted equipment.

• Do not dispose of electrical appliances as unsorted municipal waste.  Contact 

your local authorites for advice on correct disposal.

1510 Wireless Solo Call Instructions_160927.indd   6

27/09/2016   15:01:00

Summary of Contents for Wireless Solo-Call









Reviews: