2
Name:
Address:
Telephone:
Email:
Retailer:
Date of Purchase:
Model No:
We would like to keep you up to date with other helpful products. If you would rather we did not, please tick here.
Lifemax Limited
- 1 Pipers Court, Thatcham, Berkshire, RG19 4ER
www.lifemaxuk.co.uk
- Please retain for reference
TO TURN THE ALARM ON
Slide the switch on the back of the pager unit to ‘ON’. You will hear one long beep and
the LCD display will flash once to indicate that the pager is on.
CHANGE THE ALARM VOLUME
The Friends & Family Safety Alert Pro gives you the choice of four different alarm
volumes:
L1 - Default
L2 - Low
L3 - Medium
L4 - High
To change the volume level, press and hold the main button on the pager (labelled ‘STOP’) for 2 seconds. You
will hear 2 short beeps and the LCD display will show ‘L1’ (default volume). Select the desired volume level by
pressing the main pager button. Once you have chosen the desired volume level, leave the pendant dormant
for four seconds and your choice will be automatically saved.
CHARGE THE PAGER
Connect the USB cable to the charging base and plug in the USB to a power source (laptop or power
adaptor). Place the pager into the charging base and charging will commence immediately. Whilst charging
the pager will show a red light on the LCD display. Once charging is complete the light will turn from red to
blue.
TO PAIR THE PAGER AND PENDANTS
Ensure the pager is on and in the charging base and that the USB cable is plugged into
a power source. Press and hold the pairing button on the charging base for 2 seconds.
You will hear a beep and the pager will show a number on the LCD screen. You will also
notice the LCD screen has a red and blue flashing light. This is to notify that the pager is
in pairing mode. The pager will stay in pairing mode for 30 seconds only. Use the up and
down buttons on the charging base to select the remote number. Once chosen, press
and hold the button on the pendant to complete the pairing process. You will hear four
short beeps to confirm this.
Repeat the steps above to add more pendants. Once pager unit can be paired with up to 45 pendants.
NOTES
A red light will flash every 3 seconds on the LCD screen of the pager unit as a warning
that the pagers batteries are running low. Charge the pager using the charging base as
described above at your earliest convenience.
Should you wish to reset the system to factory defaults, press and hold the reset button
the back of the pager for 3 seconds. You will hear three short beeps to confirm this
process has been successful.
1616 - 1616IM080917.indd 2
18/09/2017 15:33:24
