www.themdsports.com
1517204
10
(Continued on the next page.)
ELECTRONIC SCORER OPERATION
Install Batteries
Battery Box: Unscrew bolt using a screwdriver and open the battery box. Insert 4 “AA” batteries ( not included) in the
order of polarity as shown on the inside cover. Then close the cover using a screwdriver. Turn the power ON using
the ON/OFF switch.
Reminding:
a. Batteries must be installed according to the correct polarization (+ and -) requires.
b. Please clean the battery contacts and also those of the devices prior to battery installation.
c. If the game will not be used for a long period of time, we recommend that the batteries should be removed.
1. Plug in the power cord and switch power to "ON". "Time" displayed will be "15:00" accompanied with a "fifteen
minute" warning.
2. Press the "MINUTES" button to set up playing time.
3. Press "START/RESET" to begin game play. The time display will count down after the music stops.
4. When the "HOME" player scores, "HOME" indicator will show 1 point.
5. When the "VISITOR" player scores, "VISITOR" indicator will show 1 point.
6. Score only counts when goal made after cheering sound is finished.
7. Once game is started, the "Minutes" button cannot be adjusted. This only option is to reset the time to the starting
time.
NOTE: THIS WILL RESET THE SCORES TO ZERO
8. The scorer will turn off automatically when idle for 5 minutes.
9. Press "MINUTES" or " START/RESET" to turn on the scorer again after the stoppage period.
WARNING:
!
1) Requires 4 “AA” batteries (not included).
2) Do not mix old and new batteries.
3) Do not mix alkaline, standard (carbon zinc), or
rechargeable (nickel-cadmium) batteries.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the useris encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
