7
SETTING THE USER CODE:
• Open the safe, press the reset button, start setting code when the yellow light
goes on.
• Input new code (3-8 digits), and press the “#”or
“*”
button to confirm with beeps,
which indicates the acceptance and storage of the new code.
• The beeping automatically stops after beeping for approx. 20 secs and if the
customer wants to stop it before that then should use emergency or remove
batteries or else beeping will stop automatically after few seconds.
SETTING MASTER CODE:
• Open the safe, input “0” twice and press the reset button, start setting code when
beeps and the yellow light goes on.
• Input the new master code (3-8 digits),then press “#” or
“*”
button to confirm, it
will be confirmed by beeps,setting is done successfully.
• If the yellow light flashes with beeps, it means the new code is invalid and should
operate again.
OPENING THE SAFE WITH THE EMERGENCY KEY:
Upon first receipt of the safe, or either the electronic circuit malfunction or codes
unknown.You could also use the emergency key to open the safe.
• Remove the cover of the emergency lock.
• Insert the emergency key, turn it count clockwise, then turn the knob (master key)
clockwise to open the door.
8
