4
3
2. If defects are caused by damage in transit, mishandling, tampering, misuse or
unauthorized repair.
3. Then push the relevant knob and turn it in clockwise or anti-clockwise direction.
4. If the repair is carried out by any person other than the one duly authorised by the comp.
5. The decision of the company regarding the nature of fault/defect for exercising of this
warranty shall be final and binding.
6. Glass breakage if it is not covered under warranty standard.
For availing this warranty, kindly retain your copy of the warranty card duly signed and
stamped by your dealer.
1. Lifelong L.P. Gas Stove is simple & safe to use. Turn gas stove upside down & fit the
rubber grommets into place.
2. Connect gas stove to the gas cylinder by fitting the free end of rubber tube to the inlet
connecting nozzle. The rubber tubing should be laid in such a manner so as to avoid sharp
bends.
3. While putting off the burner first turn stove knob to OFF position & then close the
regulating valve provided with the cylinder.
4. Three burners auto ignition is provided with Piezo ignition system. For lighting the
burner, press the operating knob fully and turn to the “ON” position the burner will light
automatically.
5. Auto spark model is provided with multi-spark ignition system. For lighting the burner,
press the multi-spark ignition system. For lighting the burner, press the operating knob
fully and turn it to “ON” position. Simultaneously, press the Auto spark switch. The burner
will light automatically.
6. In both the above models ensure the gap between electrode tip and stove burner is less
than 4mm, also ensure that the spark is directed at the burner hob, if required, adjust the
electrode tip closer to burner knob, to reduce gap.
7. Always keep the ceramic and electrode tip dry. In case of spillage, wipe wiith cloth.
8. The cyliinder should not be tilted horizontally while in use.
9. Take care of to avoid spillage while cooking as this may result in extinguishing the flame
and clogging of burner hole.
10. Before removing any dish from the burner, switch OFF the appropriate knob.
11. Do not try to dismantle or repair yourself the gas valves or burner nozzles as the same may
not be replaced properly due to damaging of threads or lack of proper tools or training
12. In case of any difficulty regarding operation, please contact your gas dealer for necessary
action.
KEY POINTS
