PARTS (FIG 1)
Thank you for Purchasing the Lifelong Electric Kettle. You can
now enjoy your tea time without the hassle of stoves and
burners.
1. Cap
2. On/Off Switch
3. Light
4. Cordless base-360
1
2
3
4
7. Place the power base on a dry flat surface.
8. Place the kettle on the power base. The electrical
connections will be made automatically once the kettle slides
onto the plug base.
9. Plug the cord set into an earthen power socket.
10. The appliance is switched ON by pressing the ON/OFF
switch. The pilot light will come on.
11. When the water has boiled, the kettle will switch OFF
automatically.
12. Do not remove the kettle from the power base without
switching OFF first.
13. To pour water, lift the kettle from the power base and pour.
INSTRUCTIONS FOR USE
1. Before first use, fill the kettle with clean water to maximum
capacity and boil. Discard the water repeat.
2. The kettle should always be unplugged when filling or adding
water.
3. Fill the kettle with water to the desired level (marked). Do not
overfill or there will be a risk of spillage or spitting. Do not
forget to close the lid after filling, otherwise the kettle will not
automatically switch off after use.
4. Do not fill with less than MIN indication to prevent the kettle
running dry while operating.
5. Do not fill with more than MAX indication.
6. An automatic safety cut-out has been fitted for protection
against overheating. It will operate if the kettle is switched ON
when containing insufficient water. If the automatic safety
cut-out has operated, disconnect from the power outlet
and allow the kettle to cool down for 5 to 10 minutes. Then
refill with water and switch ON -the kettle will then boil and cut
off as normal operation.
DE SCALING
De scale the kettle regularly. With normal use, at least twice a
year.
1. Fill the kettle up to MAX with a mixture of one part ordinary
vinegar and two parts water. Switch on and wait for the
appliance to switch off automatically.
2. Let the mixture remain inside the kettle overnight
3. Throw the mixture away next morning.
4. Fill the kettle with clean water up to MAX and boil again.
5. Throw away this boiled water to remove any remaining scale
and vinegar.
6. Rinse the inside of kettle with clean water.
