Please note: there’re two modes configurations (Quick Mode /
AP Mode) available for you to choose before adding the device
to app. Quick Mode is recommended.
1. Make sure quick mode configuration is initiated: the indicator light blinks blue
rapidly (twice per second). If it blinks in blue colour slowly (once every 3 seconds),
press and hold the power button on the Smart Plug for 6 seconds until the indicator
light blinks rapidly.
2. Tap the icon “+” on the top right comer in “Lifelong Smart” Home App, choose your
device type and enter into “Add Device”.
3. Follow the in-app instructions to connect the Smart Plug to
your Wi-Fi network.
4. Once connected, the App will prompt the connection, and click “Done”.
5. Now you can control the Smart Plug through “Lifelong Smart” Home App.
6. Once the configuration is completed successfully, the indicator light will turn to
solid blue and the device will be added to the “Device List”.
QUICK MODE CONFIGURATION (COMMON)
