USER
MANUAL
21
51331-006
This allows a sweep of ascending flash repetition rates to be delivered. The Start Frequency, Stop Frequency and
the Dwell Time for each 1Hz increment can be set and the Intensity. The list displays each frequency increment
with the current active step highlighted. Select any step to start at or click on the Reset button to start back at the
beginning.
To set the parameters for the Sweep, click on the Setup button.
Figure 7: Sweep Stimulation setup
This allows the Start Frequency, Stop Frequency and Dwell time to be set. Click on the Set button to calculate the
full sweep parameters and fill in the table. The Flash Duration control will be available if Auto Duration has not
been set, as described above. Click on Exit when finished setting up. This will save the settings and revert to the
control panel.
Photic Stimulator Setup Software
