BACK PANEL
1. MODEL NUMBER
The Bravo is available with several different
microphone options. The model number
determines which microphone options
you have ordered.
HH=Handheld Held Wireless Microphone
HS=Headset Wireless Microphone
C=Collar Wireless Microphone
A / between two microphone options shows a
model number with two wireless microphones.
2. SERIAL NUMBER
This shows the serial number of your Bravo system.
3. POWER LIGHT
This light will be glowing green when the power
switch is on and there is adequate electrical power
to the speaker/amplifier.
4. MASTER VOLUME
This is the master volume control for the entire
unit. We recommend you start by having this
volume at 5 (1/2 way- 12:00 position).
5. 5-BAND GRAPHIC EQUALIZER
This provides accurate control over the tone of the
system. As with any graphic equalizer, the left-most
sliders effect the bass frequencies and the right
most frequencies effect the high frequencies.
You can lower these individual frequency sliders
if feedback occurs on appropriate low or high
frequencies due to the acoustical environment.
We recommend a starting setting of all sliders
in the middle position. NOTE: Use equalizer
moderately. Excessive boots of frequencies will
cause noise, potential feedback, and poor sound.
6. PLEXIGLASS COVER
This cover is intended for protection of the graphic
equalizer and master volume control. This Plexiglas
cover is also intended to discourage people from
changing the graphic equalizer and volume control
from the recommended settings. This Plexiglas
cover may be removed by unscrewing the four
screws (one in each corner). Be careful when
unscrewing the screws as the white spacers will
come off the Bravo as well.
A M P L I F I E R / S P E A K E R C O N T .
If you have questions
at any time about
your A+ Amplification
System, please call us
toll-free at:
1-800-236-4327
6
41 MEANS DRIVE, SUITE A
z
PLATTEVILLE, WISCONSIN 53818
Amplifier/Speaker
( C O N T. )
1
2
5
3
4
6
