27
Step 4
Attach the Pec Pulley Bracket (37) onto the right clevis of the Main Support Tube (39) with
one M10x65 Hexagon Head Bolt (70), one M10 Nylon Lock Nut (13), and two Ø10 Washers
(12). Tighten bolt and nut with two Wrenches provided.
Pull the Pec Cable (64) upwards to the Pec Pulley Bracket (37).
Insert the Pec Cable (64) around the Pulley (60). Then attach the Pulley (60) onto the Pec
Pulley Bracket (37) with one M10x45 Hexagon Head Bolt (32), one M10 Nylon Lock Nut (13),
and two Ø10 Washers (12). Tighten bolt and nut with two Wrenches provided.
PLEASE REFER TO THE “CABLE LOOP DIAGRAM” SECTION ON PAGE
20.
Pulley:
Hardware:
70
37
32
13
60
13
12
12
12
2 Wrenches (14-17)
Tool:
1 Pulley
4 Washers (Ø10)
2 Nylon Lock Nuts (M10)
1 Hexagon Head Bolt
(M10x65)
1 Hexagon Head Bolt
(M10x45)