10
STEP 2
Position the Rear Stabilizer (2) behind the Main Frame (69) and align bolt holes.
Attach the Rear Stabilizer (2) onto the rear curve of the Main Frame (69) with two M8x75
Carriage Bolts (1), two Ø8.5xØ18x1.5t Curve Washers (4), two Ø8.5xØ14x2.0t Spring
Washers (5), and two M8 Cap Nuts (6). Tighten cap nuts with the Multi Hex Tool provided.
Hardware:
6
5
4
1
2
6
5
4
1
2
1
6
5
4
69
(1) Carriage Bolt
M8x75
2 PCS
(4) Curve Washer
Ø8.5xØ18x1.5t
2 PCS
(5) Spring Washer
Ø8.5xØ14x2.0t
2 PCS
(6) Cap Nut M8
2 PCS
