20
ADJUSTMENTS
Adjusting the Tension Control Knob
To increase the tension, turn the tension
control knob in a clockwise direction.
To decrease the tension, turn the tension
control knob
in a counterclockwise direction.
Adjusting the Rear Stabilizer End Cap
Turn the rear stabilizer end cap on the rear
stabilizer end cap as needed to level the
upright bike.
Adjusting the Seat Height
Turn the seat post knob in a counterclockwise
direction until it can be pulled out. Pull out the
seat post knob and then slide the seat post up
or down direction to the suitable position.
Lock the seat post in place by releasing the
seat post knob and sliding the seat post up or
down slightly until the seat post knob "pops"
down into the locked position. For added
safety, tighten the seat post knob in a clockwise
direction.
NOTE: Do not set the seat post height any
higher than the marked line.
Adjusting the Seat Forward or Back
Turn the seat adjustment knob to loosen the
seat sliding tube. Slide the seat sliding tube
forward or back to desired position and turn the
seat adjustment knob to tighten.
NOTE: Continue to turn the seat adjustment
knob until the seat sliding tube is secure
before exercising.
Seat Post
Knob
Rear Stabilizer End Cap
Seat Adjustment
Knob
Tension Control Knob
