12
Step 6
Insert the Leg Height Adjustable Tube (13) into the top square hole of the Front Frame (10).
Adjust the position and insert the Round Knob (27). Turn the Round Knob (27) in the
clockwise direction to tighten.
Attach the Leg Developer (12) onto the Leg Height Adjustable Tube (13) with one M10x75
Hexagon Bolt (36), one M10 Hexagon Nylon Lock Nut (41), and two Ø10 Washers (42).
Tighten bolt and nut with two 17-19 Wrenches provided. Then cover the M10x75 Hexagon
Bolt (36) and M10 Hexagon Nylon Lock Nut (41) with two M10 Nut Caps (44).
Install one Spring Clip (25) onto the weight sliding tube of the Leg Developer (12).
Insert the
Foam Roller Tube
(11) through the hole in the
Leg Developer (12)
, leaving room
on each side for the
Foam Rollers
(20). Slide both
Foam Rollers
(20) onto the
Foam Roller
Tube
(11).
Use the same procedure to install the other
Foam Roller Tube
(11) and
Foam Rollers
(20).
Hardware & Plastic Parts:
Tool:
2 Wrenches (17-19)
25
21
20
20
0
11
11
12
27
13
20
42
44
41
42
44
36
20
1
(27) Round Knob
1 PC
(36) Hexagon Bolt M10x75
1 PC
(42) Washer Ø10
2 PCS
(41) Hexagon Nylon Lock Nut M10
1 PC
(25) Spring Clip
1 PC
(44) Nut Cap M10
2 PCS
(20) Foam Roller
4 PCS
