10
STEP 5
Position the Rear Stabilizer (8) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (8) onto the rear of the Main Frame (1) with two Hexagon Socket
Pan Head Cap Bolts (9) and two Washers (10) that were removed. Tighten bolts with the
Allen Wrench provided.
STEP 6
The Cranks and Pedal Shafts are marked with the letter R (Right) and L (Left) to denote
the side of the spinning bike they are on.
Insert the pedal shaft of Left Foot Pedal (18) into threaded hole in the Left Crank (76). Turn
the pedal shaft by hand in the counterclockwise direction until snug.
NOTE: DO NOT turn left foot pedal shaft in the clockwise direction, doing so will strip
the threads.
Tighten the pedal shaft of Left Foot Pedal (18) with the Multi Hex Tool with Phillips
Screwdriver provided.
Insert pedal shaft of Right Foot Pedal (19) into threaded hole in Right Crank (77). Turn the
pedal shaft by hand in the clockwise direction until snug.
NOTE: DO NOT turn right foot pedal shaft in the counterclockwise direction, doing so
will strip the threads.
Tighten pedal shaft of Right Foot Pedal (19) with the Multi Hex Tool with Phillips Screwdriver
provided.
9
10
8
1
9
10
8
1
L
18
19
R
1
L
77
76
