11
ASSEMBLY INSTRUCTIONS
1. Install the Front Stabilizer.
Attach the Front Stabilizer (2) onto the front curve
plate of Main Frame (1) with two M8x52 Carriage
Bolts (22), M8x16x1.2 Washers (39), M8 Spring
Washers (37), and M8 Nylon Nuts (30). Finally,
cover the M8 Nylon Nuts (30) with two M8xØ19
Bolt Caps (71).
2. Install the Rear Stabilizer.
Attach the Rear Stabilizer (3) onto the rear end of
the Main Frame (1) with four M8x15 Bolts (21), M8
Spring Washers (37), and M8x16x1.2 Washers
(39).
3. Install the Front Post Cover and Front Post.
Insert the Front Post (4) into the Front Post Cover
(77). Connect the Sensor Wire II (91) from the
Main Frame (1) to the Sensor Wire I (90) from the
Front Post (4).
Put the cable end of resistance cable of Tension
Control Knob (87) into the spring hook of Tension
Cable (19) as shown in drawing A of figure 3. Pull
the resistance cable of Tension Control Knob (87)
up and force it into the gap of metal bracket of
Tension Cable (19) as shown in drawing B of figure
3.
Insert the Front Post (4) onto the tube of the Main
Frame (1) and secure with four M8x15 Bolts (21),
M8 Spring Washers (37), and M8x16x1.2 Washers (39).
30
37
39
22
2
71
1
3
39
37
21
87
19
39
37
21
1
21
37
39
4
77
1
21
37
39
87
19
19
87
90
91
B
A
1
2
3
