Insert the Two pin connectors properly into the ballast. Note that the male end should be fully pushed into the
ballast. Then screw over the cover.
NOTE: If the fountain is not properly filled with water it will cause the stream to distort and splatter. To fix this
simply tilt the nozzle 15-20 degrees forward and return it back to desired angle. If noise is coming out of the unit
do the same. At times you may have to tilt the nozzle 15 degrees in the opposite direction then back to normal.
Specifications:
Inlet Pipe - 3/4"
Outlet Pipe - 17mm
Electrical Requirement - LED operated on a AC 12 volt power adapter
LED Light - 3 x 3 Watts Multi-Color or 5 Watt Single-Color
Lift - 16 feet
Ideal Installation - 6-10 feet Spray Distance with 5-6 feet max height of the arch. Further distance and higher
arch can be maintained if installed indoor with no wind. AVOID USING IN WINDY LOCATIONS.
Jolie
Products,
Inc