STEP 4:
FIGURE 4
8
• Insert two GUIDE RODS (9) into the TOWER (1) as shown on FIGURE 4.
• Slide two 3/4 X 2” WEIGHT STACK CUSHIONS (8) down over the GUIDE RODS (9) as shown in FIGURE 4.
• Using
EXTREME CARE
slide all twenty WEIGHT PLATES (10) down over the GUIDE RODS (9) on to the WEIGHT STACK CUSHIONS
(8). Make sure that the WEIGHT PLATES (10) are all facing as shown.
• Slide the HEAD PLATE ASSEMBLY (12) down over the GUIDE RODS (9) onto the weight stack as shown in FIGURE 4.
• Slide two 13/16” SHAFT COLLARS (13) and the PULLEY BOOM (3) over the GUIDE RODS (9) as shown in FIGURE 4.
9
10
1
12
13
8
3
