12.
Causes and resolution of potential failures
No.
Fault
Causes
Resolution
1
The treadmill can not be
started
The security key is not in the
correct position.
Set the security key to the
correct position.
The main switch is off (in
position "0")
Turn on the main switch to
position "1".
2
The control panel does not
display any information.
The control panel and the
control unit are
disconnected.
Contact service center.
3
The heart rate is not
displayed.
The sensors are not
sufficiently damp.
Lightly moisten the sensors
with water.
Sensing is interfered with by
another electromagnetic
field.
Move the treadmill to
another location. Avoid
contact with electromagnetic
waves.
4
The treadmill is sliping.
The seat belt is not
tightened.
Tighten the running belt
according to Chapter 8.
5
The treadmill deflect to the
sides.
The treadmill is not adjusted.
Adjust the deviation of the
treadmill in accordance with
Chapter 8.
If you are unable to remedy the failure even with the above solutions, please contact
our specialist service as soon as possible.
13.
Error messages on the display
If there are any problems in running on the treadmill, the type of fault will appear on
the display. In the event that such a fault occurs, please contact our service center.
Code of fault
Description of fault
Troubleshooting
E-01
Cable break or improper connection.
Malfunction of console or PCB.
Check that all cables are properly
connected. Contact the service center if
necessary.
E-02
The power cord is not connected
correctly.
The PCB is damaged or short-circuited.
Check that the power cord is properly
connected. Contact the service center if
necessary.
E-05
Current overload.
Check for excessive friction. Use silicone
oil to reduce friction.
Make sure the belt is not overloaded.
E-07
Security key not connected.
Check that the security key is in the
correct position.
E-09
Loss of MTC communication signal.
Restart the treadmill. If the problem
persists, contact a service center.
14.
Guarantee
The
product is protected by the warranty valid period in the country where the sale
was made. This warranty covers any manufacturing defects. It is not provided for wear
and tear due to normal use, defects and wear resulting from improper handling,
storage and use (example use for a purpose other than the product is) and any product
Summary of Contents for 4891223123258
Page 42: ...P ednastaven programy...
Page 43: ......