Page | 5
Step 6:
a) Remove 8 bolts (300) from Die Cast Pivot
(003) with the Tool provided.
b) Assemble the Aluminum Beam (001) with
the same 8 bolts and tighten firmly.
Step 7:
a) Remove 4 bolts (300) from Seat (119) with
the Tool provided
b) Assemble Seat (119) with the same 4 bolts
and tighten firmly.
Step 8:
a) Remove 4 bolts (303) from Carriage with
the Tool provided.
b) Assemble 2 Seat Carriage Covers (117)
with the same 4 bolts and tighten firmly.
Note: Ensure that the 2 Seat Carriage Covers
(117) engage correctly into each other as
shown in the diagram below.
Step 9:
Remove all protective packing material and
discard.
Assembly Complete
It is important to read the entire user’s manual
thoroughly to familiarize yourself with this
Rower before using it.
