lifebreath.com
9
6
M
OUNTING
(RNC4-TPD
/
-TPF)
Mounting the RNC4-TPD and RNC4-TPF:
(1)
Mounting Points
1.
Locate the four mounting tabs on the left and right sides of the unit, at the front and back.
2.
Using a flat head screwdriver, bend out the four tabs to approximately 45 degrees.
3.
Once the tabs have all been bent outwards, insert the “S” hooks through the four holes on the tabs.
4.
Install the unit to the structure. Refer to
Attention
•
Do not drill additional holes in the HRV
