LIFEAIR IonFlow 500C, Manual

Page: 4 / 78

4
You MUST disconnect the power supply and
turn off the air purifier before cleaning.
Do NOT wash the collector in the dish-
washer.
Do NOT use cleaning products that contain
alcohol solutions, ammonia, or alkaline
substances, as these products may damage
the air purifier.
The collector should be cleaned approx.
once every two weeks or when needed. The
collector may require more frequent clean-
ing if used in highly contaminated environ-
ments.
Cleaning the collector:
1. Clean the collector with washing-up
liquid, water, and a soft sponge.
2. Dry the collector with a dish towel.
3. Put the collector back on the ion genera-
tor according to the above instructions.
If you have followed the above instructions
but the collector is still not clean, try the
following:
1. Spray detergent onto the collector and
let it work for 5 minutes.
2. Use a damp sponge and rub any
remaining spots until they disappear.
3. Dry the collector with a dish towel and
place it back on the ion generator
according to the above instructions.
4. Repeat the above procedure if neces-
sary.
ENGLISH
CLEANING AND MAINTENANCE
PRODUCT DESCRIPTION
1 ion generator (above=outlet and metal hook, below=3 corona needles)
1 particle collector
1 bracket
1 transformer
1 canopy
1 pressure relief device
1 corona needle brush