13
OPERATING INSTRUCTIONS
1.
Power the Display On/Off
Or
Turn the heater on by pressing the ON/OFF button on the control
panel or by pressing the Power button on the supplied remote
control.
Note: Powering off the heater will stop the heating process only.
The fan will continue to blow for approximately 3 more minutes
to allow for the interior components to cool. The fan will then
turn off automatically.
2. Selecting a Heat Mode
Or
Press the MODE button to toggle between the three heat
modes.
High Mode uses 1500W; Low Mode uses 750W. ECO mode
is an Economic Energy Saving Function. When ECO mode is
chosen, the heater will manage itself from less to more
heating power (watts) in an attempt to maintain a constant
warm 68
℉
(20
℃
).
3. Setting Desired Temperature
Or
Or
Or
Adjust the desired temperature by pressing the Up/Down arrows
on the control panel or remote control.
Or
Desired temperature options vary from 59
℉
to 86
℉，
or from
15
℃
to 30
℃
. Once you have chosen the desired temperature, the
heater will remain on until the room temperature increases to the
temperature on the digital display. The heater will cycle on and
off to maintain the desired room temperature.
Or
Press
℃
/
℉
button to change the display temperature between
Fahrenheit and Celsius.
The Fahrenheit indicator LED will light when the temperature is
displayed in Fahrenheit.
The Celsius LED will light, when the temperature is displayed in
Celsius.
