![Life Smart LS-TCED-IC2 Manual Download Page 11](http://html1.mh-extra.com/html/life-smart/ls-tced-ic2/ls-tced-ic2_manual_1909011011.webp)
9
NO.1 : Connect the plug of the bench heater to
connector A and make sure they are tightly
connected.
NO.2 : Connect the plug of the floor heater to
connector B and make sure they are tightly
connected.
<
7
>
INSTALLING THE BENCH
LS-TCED-IC2 LS-TCED-IC3
1. Install the bench by sliding it over the horizontal bench guides on the
side panels.
2. Push the bench all the way in until it can touch the back panel and is
securely in place.
3. Make sure of the bench position so that the smooth and finished side of
the bench are facing up and forward.
<
8> PLACE THE FRONT PANEL AND CONNECT IT TO THE SIDE
PANELS WITH BUCKLES
LS-TCED-IC2 LS-TCED-IC3