Never operate heater in or around a bathtub, shower, or swimming pool.
Only open heater if instructed by an authorized representative of the manufacturer. There are
limited user-serviceable parts inside.
Use heater only as described in this manual. Any other use is not recommended by the
manufacturer as it may lead to fire, electric shock, and/or series physical injury or death.
Heater Specifications
LIFESMART
Heater
Model# LS-Stealth-6FP
Carton Size: 23.2in x 17.4 in x 21.7 in Thermostat: Electronic Analog
Heater Size: 20.9in L x 15in W x 18.3in H Fan System: Cross Flow Fan
Net Weight: 45.5 lbs
Fan Noise Level: 46 db
Gross Weight: 49.5 lbs
BTU: 5600
Cabinet: ¾ ply
– Dark Oak
Delayed Start Function
Power Cord: 5.8 ft / 16 gauge
Remote Control
Heat Chamber with Diathermanous Copper Plate
“HI” Function: 1500 watts
Heating Elements: 6 Infrared Quartz Bulbs w/ Nickel-Chrome Filament
“LOW” Function: 1000 watts
Power Requirement: 120V 15 amp
Washable Filter
Heating Elements Life Expectancy Potential: Rated 20,000 hrs
Warranty: Limited 5-Year Parts Only
Heat Type: Therapeutic Quartz Infrared Heat
How It Works
The LIFESMART Infrared Heater works with your in-home furnace to provide supplement heat. In short,
room temperature air circulates from the rear of the LIFESMART Infrared Heater, passes through a
highly efficient filter, enters a chamber that houses the Infrared Quartz Bulbs, and exits as heated air
from the Diathermanous Copper Plate constructed on the front of the unit. The LIFESMART Infrared
Heater ideally heats a room of approximately 1000 unobstructed square feet, but can be used to heat up
a single room size up to 1800 square feet, depending on the ambient temperature. And it does all this
with a noise level below 46db. The LIFESMART Infrared Heater is not for use as the primary/sole
heating system.
Components and Functions
A. The LIFESMART Infrared Heater is constructed with Infrared Quartz Bulbs. Each Infrared Quartz
Bulb is rated at 250W. These bulbs produce therapeutic infrared rays that warm the air which
passes through the inner chamber. The Infrared Quartz Bulbs are constructed with a thermal
conducting housing. The incorporated twisted style on each bulb increases the efficiency of the
unit.
B. An AC Cross Flow Fan pushes air over these Infrared Quartz Bulbs. Cross Flow Fans create a
wide flow of air using a cylindrical-shaped impeller. Air is drawn inside the LIFESMART Infrared
Heater, flows along the circumference of the chamber and over the Infrared Quartz Bulbs, and is
blown out laterally creating a uniform flow of warm air.
