Basic operation
1. Volume control: Press and hold the "+" or "-" button for a short time during calls
or music playing, the volume will change level by level with a "beep" for each level
change. If you press the "+" or "-" button after the maximum volume or minimum
volume is reached, the volume will not change. The "beep" at this moment means
that the volume has been adjusted to the maximum or minimum.
2. Multifunction button: this button is used to turn on/off the headset, connect
and reset headset, etc.
3. LED indicator and voice prompts: When you turn on the headset, the blue LED
will flash three times and a voice prompt "power on" will appear. When you turn
off the headset, the red LED will flash three times and a voice prompt "power off"
will appear. When your headset is in turning on mode or in standby mode, the
blue LED will flash once every 5 seconds. During an incoming call, the blue LED
will flash continuously. If the call is finished, the blue LED will flash once every 5
seconds. If your headset is being charged, the red LED will light. If your headset is
fully charged, the red LED will turn off and the blue LED will turn on.
Pair & connect
1. With the headset power off, press and hold the Multifunction Button for about
6 seconds. You will hear the voice prompts "power on" and "pairing" and see the
blue LED and red LED flash alternately.
2. Turn on the Bluetooth feature on your mobile phone or
other devices, then use menus to "add", "search" or
"scan" new Bluetooth devices.
