www.LifeIonizers.com/Support
44
75
M9/M9 UC NG
Q: Why do I want to adjust the amperage on my
Water Ionizer?
A: As you know, all water sources are not created equal.
Your water source plays an important role on how your
water Ionizer creates Ionized Alkaline Water. Being able to
adjust the amperage will allow you to find the optimum
pH for the best production of Alkaline Ionized water based
on your water source.
Q: Do I need to hire a plumber to install the units?
A: Most people find it is not necessary to call a plumber
for most standard installations. For custom installations,
a plumber may be needed depending on the individual
circumstances.
Q: What do I do if the filters are leaking?
A: It is important to note where on the filter it is leaking.
Most leaking comes from fittings that are not seated
properly. Reseat the tubing into the filter by pushing in
firmly and then pulling back. It may be necessary to re-trim
the end of the tubing to get a fresh surface. Make sure to
shut off the water before working with the water supply
lines.
Q: How do I set up the pre-filter unit?
A: The pre-filter is installed in the supply line on the ionizer.
Quick connects are provided for your convenience. Simply
push the tubing in the connector and it seals automatically.
When installing the filter for the first time, it is suggested
to let the filter fill with water for a few minutes before
turning on the ionizer.
Summary of Contents for M9 UC Next Generation
Page 1: ......
Page 49: ...revised 1 3 14 ...
