24
LIFE | M9 X/M9 X UC NG
LifeIonizers.com/support
FUNCTIONS F-30 aND aFTeR
To enter F-30 and after functions you will need to do the following.
• Press and hold the
“MENU”
&
“FILTER 1”
buttons simultaneously
for 5 seconds.
• The machine will display F20 and the screen.
• Press and release the
“MENU”
button continuously to scroll
through the other
F-functions
.
PLaTe SeLeCTION (F-30)
• Select number of plates (5,7,9,11 & 13)
UNITS COME
PRE-SELECTED
LaNGUaGe SeLeCTION (F-40)
• Select preferred language.
(English is the default language)
1- Korean
2- English
3- Chinese
4 -Russian
5 -Spanish
PH DISPLay OPTIONS (F-50/F-51)
• Default will show pH setting only
• pH Ho - Fixed level (use this level)
• pH En - Adjustable level
CLeaNING (F-60)
(reverses the electric power to clean the plates)
(1) Washes beginning & end of water usage
(2) Washes at the beginning only
(default setting)
(3) Washes at the end only
(4) Does not wash at all
F-70 AND AFTER FOR ENGINEER USE ONLY
DO NOT CHANGE. LEAVE AT DEFAULT SETTINGS.
1st FILTeR SeTTING (F-70) 3,000 liters
(30 is default setting)
2nd FILTeR SeTTINGS (F-71) 6,000 liters
(60 is default setting)
WaTeR FLOW CHeCk (F-80)
(0 is default setting)
RUN TIMeR (F-81) 10 minutes
(10 is default setting)
To show the power consumption and water flow information, press the
“Menu” button and “Filter 1” button simlutaneously and hold down for
about 8 seconds. NOTe: Water must be running
