9
ASSEMBLY INSTRUCTIONS
1. Front and Rear Stabilizers Installation
Position the Front Stabilizer (10) in front of Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (10) onto the front curve of the Main Frame (1) with two M10x60
Carriage Bolts (12), two Ø10 Big Curve Washers (14), and two M10 Cap Nuts (15).
Tighten cap nuts with the Multi Hex Tool provided.
Position the Rear Stabilizer (11) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (11) onto the rear curve of the Main Frame (1) with two M10x60
Carriage Bolts (12), two Ø10 Big Curve Washers (14), and two M10 Cap Nuts (15).
Tighten cap nuts with the Multi Hex Tool provided.
Hardware:
(12) Carriage Bolt
M10x60
4 PCS
(14) Big Curve Washer Ø10
4 PCS
(15) Cap Nut M10
4 PCS
Tool:
Multi Hex Tool
12
10
11
12
14
15
1
14
15