23
SAFETY TETHER KEY
LUBRICATION
Lubricating under the running belt will ensure superior performance and extend its life
expectancy. After the first 25 hours of use (or 2-3 months) apply some lubricant, and
repeat for every following 50 hours of use (or 5-8 months).
How to check running belt for proper lubrication
Lift one side of the running belt and feel the top surface of the running deck.
If the surface is slick to the touch, then no further lubrication is required.
If the surface is dry to the touch, apply some lubricant.
How to apply lubricant
Lift one side of running belt.
Pour some lubricant under the
centre
of the running belt on the top surface of the
running
deck
.
Run on the treadmill at a slow speed for 3 to 5 minutes to evenly distribute lubricant.
NOTE: DO NOT over lubricate running deck. Any excess lubricant that comes out should
be wiped off.
EMERGENCY STOP
Before beginning a workout session ensure that the Safety Tether Key is properly placed
onto the Computer Console and the Safety Clip is securely attached to an article of your
clothing. If you fall the clip will pull out the
SAFETY TETHER KEY
from the Computer
Console and the running belt will stop immediately for emergency stop, helping to prevent
injury. The computer screen will display ---.
Replaced the Safety Tether Key onto the Computer Console. Press the START button to
begin exercise again.
Lubricant
1 PC
