11
ASSEMBLY INSTRUCTIONS
1. Front Stabilizer Installation
Remove two ST4.2x25 Screws (32) from both
Front Left/Right Stabilizer End Caps (7, 8).
Slide both Front Left/Right Stabilizer End
Caps (7, 8) onto each end of the Front
Stabilizer (10) and align screw holes.
Secure the Front Left/Right Stabilizer End
Caps (7, 8) with two removed ST4.2x25
Screws (32) in the bottom. Tighten screws
with the Multi Hex Tool with Phillips
Screwdriver provided.
Position the Front Stabilizer (10) in front of
Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (10) onto the front
curve of the Main Frame (1) with two M8x65
Bolts (12), M8 Cap Nuts (15), and Ø22xØ8
Curve Washers (42). Tighten bolts with the
Multi Hex Tool provided.
Hardware:
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
2. Rear Stabilizer Installation
Slide both Rear Left/Right Stabilizer End Caps
(9, 13) onto each end of the Rear Stabilizer (11).
Install two M10 Adjustable Levelers (38) with
M10 Nuts (39) onto the Rear Stabilizer (11).
Position the Rear Stabilizer (11) behind the Main
Frame (1) and align bolt holes.
Attach the Rear Stabilizer (11) onto the rear
curve of the Main Frame (1) with two M8x65
Bolts (12), M8 Cap Nuts (15), and Ø22xØ8
Curve Washers (42). Tighten bolts with the
Multi Hex Tool provided.
Hardware:
(12) Bolt M8x65
2 PCS
(42) Curve Washer
Ø20xØ8
2 PCS
(15) Cap Nut M8
2 PCS
(12) Bolt M8x65
2 PCS
(15) Cap Nut M8
2 PCS
(42) Curve Washer
Ø20xØ8
2 PCS
12
42
15
9
13
38
39
38
39
11
1
15
42
Tool:
Multi Hex Tool
Multi Hex Tool with Phillips
Screwdriver S8, S13, S14, S15
10
12
32
32
7
8
1
42
15
15
42
Tool:
Multi Hex Tool
