Life Gear 20296 Owner'S Manual Download Page 9 | Manualshive

Page: 9 / 19

Life Gear 20296 Owner'S Manual Download Page 9

8

2. Seat Post, Seat Cushion, and Seat Sliding Tube Installation

Insert the Seat Post (5) into the Seat Post Bushing (63) on the tube of the Main Frame (1)
and then attach the M12 Seat Post Knob (62) onto the tube of the Main Frame (1) by turning
it in a clockwise direction to lock the Seat Post (5) in the suitable position.
Remove three Ø8 Washers (9) and three M8 Nylon Nuts (10) and from underside of
the Seat Cushion (11).    Remove nylon nuts and washers with the Multi Hex Tool with
Phillips Screwdriver provided.    Guide bolts on underside of the Seat Cushion (11) through
holes on top of the Seat Sliding Tube (7), attach with three removed Ø8 Washers (9) and M8
Nylon Nuts (10).    Tighten nylon nuts and washers with the Multi Hex Tool with Phillips
Screwdriver provided.
Guide the bolt on underside of the Seat Sliding Tube (7) through hole on top of the Seat Post
(5), attach with one Ø20xØ8x2.0T Big Washer (12) and M8 Seat Adjustment Knob (13).

11

9

10

7

12

13

5

62

1

63

Multi Hex Tool with Phillips Screwdriver

S10, S13, S14, S15

Tool:

«
...
7
8
9
10
11
...
»

Summary of Contents for 20296




















Reviews:

No comments