Seated Leg Curl
Assembly Instructions
1.
LOOSELY assemble the FRONT BRACE (1) and REAR BRACE (2) to the
TOWER (3) using four M10 X 130mm BOLTS (4), eight 3/8" SAE WASH-
ERS (5) and four M10 NYLOCK NUTS (6) as shown.
2.
LOOSELY assemble the SEAT FRAME (7) to the FRONT BRACE (1) and
REAR BRACE (2) using four M10 X 90mm BOLTS (8), eight 3/8" SAE
WASHERS (5) and four M10 NYLOCK NUTS (6) as shown.
3.
LOOSELY assemble the TOP BRACE (9) to the SEAT FRAME (7) and
TOWER (3) using two M10 X 35mm BOLTS (10), four 3/8" SAE WASH-
ERS (5) and two M10 NYLOCK NUTS (6) at the SEAT FRAME and two
M10 X 70mm BOLTS (11), four 3/8" SAE WASHERS (5) and two M10
NYLOCK NUTS (6) at the TOWER as shown.
4.
Tighten all BOLTS and NUTS securely.
5
Assemble the MAIN PIVOT BRACKET (12) to the TOWER (3) using one
TOWER SUPPORT PLATE (13) (as shown), two M10 X 75mm BOLTS (14),
four 3/8" SAE WASHERS (5) and two M10 NYLOCK NUTS (6) at the top
of the MAIN PIVOT BRACKET. Use one M10 X 70mm BOLT (11), two 3/8"
SAE WASHERS (5) and one M10 NYLOCK NUTS (6) at the bottom of the
MAIN PIVOT BRACKET. Tighten the BOLTS and NUTS securely.
Summary of Contents for Seated Leg Curl
Page 1: ...Seated Leg Curl Assembly Instructions...
Page 3: ......
