Belt Inspection - Brake and Drive Belts
The PowerMill has two belts. A brake belt and a drive belt.
Item
Description
Qty
1
Brake belt
1
2
Drive belt
1
Inspect belts for cracking or wear.
Belt Cracking
If cracks appear 2 cm or less apart, then 80% of the belt life is gone and the belt should be replaced.
Belt Wear (Material Loss)
If material loss is occurring as shown above, the belt should be replaced.
NOTE: If the belt between the motor and the brake is removed for any reason, it must be replaced with a new one.
How To's
Knowledge Base
for more detailed information.
Page 20 of 23
