14
STEP 9:
Attach the BACK PAD (7) to the PAD HOLDER ASSEMBLY (4) as shown using two M10 x 35mm SCREWS (24) and
two FLAT 3/8” WASHERS (19). Tighten the screws securely. Do not overtighten the screws.
Attach the HEADREST PAD (6) to the PAD HOLDER ASSEMBLY (4) as shown using two M10 x 35mm SCREWS
(24) and two FLAT 3/8” WASHERS (19). Tighten the screws securely. Do not overtighten the screws.
Insert HOLE PLUGS (8) into the four access holes underneath the PAD HOLDER ASSEMBLY (4).
Summary of Contents for LFADJ
Page 5: ...5 HARDWARE Centimeters...
