manualshive.com logo in svg

Life Fitness IC5, Manual

Share
Download
Life Fitness IC5 Manual Download Page 20

Version 1.0 2017  IC-LFIC5B2-01  Copyright by Indoor Cycling Group GmbH 2017  |  www.indoorcycling.com

HOW TO OPERATE THE 

INDOOR CYCLE

MOVING THE INDOOR CYCLE:

It is recommended that two people move the Indoor Cycle. In order to prevent accidents and damage to the plug-in 

sockets of the handlebars it is necessary to firmly fix the vertical handlebar adjustment before the wheel is tilted. Please 

take extra care when moving the Indoor Cycle over uneven surfaces. A second person is advisable here, to prevent the 

cycle from tilting to one side. Allow a minimum safety distance away from the nearest equipment, objects or walls 

as illustrated below.

RESISTANCE ADJUSTMENT LEVER 

EMERGENCY BRAKE (PUSH RESISTANCE 

ADJUSTMENT LEVER DOWN)

For safety reasons, please always make sure you pedal in a controlled manner and adjust your pedalling frequency to 

your own cycling capabilities.

3.9“ 

(10cm)

23.6“

(60cm)

23.6“

(60cm)

3.9“ 

(10cm)

23.6“

(60cm)

23.6“

(60cm)

Summary of Contents for IC5

































Reviews:

No comments

Brands by name

Popular brands

Load more brands