Life Fitness Hammer Strength HD Elite Power Rack Assembly Instructions And Owner'S Manual Download Page 65 | Manualshive

Page: 65 / 65

background image

62

© 2017 Life Fitness, A division of Brunswick Corporation. All Rights Reserved. Life Fitness is a registered trademark of
Brunswick Corporation. Gym Wipes® is a registered trademark of The 2XL Corporation. PureGreen 24 is a trademark
of Pure Green , LLC.

Life Fitness World Headquarters
Columbia Centre III
9525 West Bryn Mawr Ave.
Rosemont, IL 60018
847-288-3300

LIFE FITNESS APPROVED CLEANERS

(United States Availability Only)

Two preferred cleaners have been approved by LIFE FITNESS reliability experts: PureGreen 24 and Gym Wipes.
Both cleaners will safely and effectively remove dirt, grime and sweat from equipment. PureGreen 24 and the Anti-
bacterial Force formula of Gym Wipes are both disinfectants that are effective against MRSA and H1N1.

PureGreen 24 is available in a spray which is convenient for gym staff to use. Apply the spray to a microfiber cloth
and wipe down the equipment. Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection
purposes and at least 10 minutes for fungus and viral control.

Gym Wipes are large, durable pre-moistened wipes to use on the equipment before and after workouts. Use Gym
Wipes on the equipment for at least 2 minutes for general disinfection purposes.

Contact Customer Support Services to order these cleaners (1-800-351-3737 or email: customersupport@lifefitness.
com).

LIFE FITNESS COMPATIBLE CLEANERS

Mild soap and water or a mild non-abrasive household cleaner can also be used to clean the display and all exterior
surfaces. Use a soft microfiber cloth only. Apply the cleaner to the microfiber cloth before cleaning. DO NOT use
ammonia or acid based cleaners. DO NOT use abrasive cleaners. DO NOT use paper towels. DO NOT apply clean-
ers directly to the equipment surfaces.

REMOVAL OF PAINT, MARKING PEN AND LABELS

Butyl cellosolve works well for removal of paints, marking pen inks, lipstick, etc.

Labels, stickers, etc. may be removed using kerosene. When the solvent will not penetrate sticker material, apply
heat (hair dryer) to soften the adhesive and promote removal. GASOLINE SHOULD NOT BE USED.

IMPORTANT HAZARDS

1. DO NOT use abrasive or highly alkaline cleaners on the shrouds.

2. NEVER scrape shrouds with squeegees, razor blades or other sharp instruments.

3. DO NOT clean shrouds in hot sun or at elevated temperatures.

4. NEVER use benzene, gasoline, acetone or carbon tetrachloride on the shrouds.

«
...
63
64
65

Summary of Contents for Hammer Strength HD Elite Power Rack


































































Reviews:

No comments

Related manuals for Hammer Strength HD Elite Power Rack

Brand: Ecco Pages: 4

Brand: JD Squared Pages: 15

Brand: DAPAudio Pages: 16

Brand: 3M Pages: 28

Brand: Modulate Pages: 2

Brand: Fisher Scientific Pages: 42

Brand: Tate Pages: 7

Brand: Tate Pages: 5

BioHarmonex BH4

Brand: Calivita Pages: 38

Brand: CAIRE Pages: 91

Coronis 5MP Mammo

Brand: Barco Pages: 4

Brand: Barco Pages: 167

Color Coronis 2MP

Brand: Barco Pages: 156

Color Coronis 2MP

Brand: Barco Pages: 12

Brand: Barco Pages: 39

Brand: Barco Pages: 158

Brand: Mandam Pages: 9

Brand: SAMCHULLY Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands