STEP 13:
FIGURE 13
50
54
53
51
19
8
5
31
3/8 X 61mm 38
49
• Route the MULTI PRESS CABLE (54) through the PRESS FRAME (8) and
SECURELY
assemble one 4-1/2” PULLEY (19) to the
PRESS FRAME (8) using four RH CAPS (53), one 3/8 X 67mm BOLT (39), one 3/8 X 61mm BOLT (38), four 3/8” SAE WASHERS
(50), four 3/8” RH WASHERS (51), two 3/8 X 1/2” FLANGE SPACERS (31) and two 3/8” LOW HEIGHT LOCK NUTS (49) as shown
in FIGURE 13.
• Route the MULTI PRESS CABLE (54) through the PRESS FRAME (8) and
PIVOT ARM (5) and
SECURELY
assemble one 4-1/2”
PULLEY (19) to the PIVOT ARM (5) using one BLACK RH CAP (52), one RH CAP (53), one 3/8 X 70mm BOLT (40), two 3/8” SAE
WASHERS (50), two 3/8” RH WASHERS (51), one 2-7/8” X 2-1/4” CABLE CLIP (23), two 3/8 X 1/2” FLANGE SPACERS (31) and one
3/8” LOW HEIGHT LOCK NUT (49) as shown in FIGURE 13.
3/8 X 70mm 40
23
53
52 BLACK
39 3/8 X 67mm
31
13
