5.
Install the left top rear cover with five screws using a Phillips screwdriver.
Qty
Description
1
Left top rear cover
1
5
Screw, 8-16 x 0.50"
2
6.
Loosen the two screws in the right inner and outer collars using a Phillips screwdriver.
Qty
Description
2
Screws
1
1
Inner collar
2
1
Outer collar
3
1
Cover
4
7.
Slide the inner and outer collars onto the right covers.
8.
Insert the tabs of the collars into the slots of the cover.
9.
Tighten the two screws using a Phillips screwdriver.
10.
Repeat steps 1 through 9 for the right side.
Remove left and right handle assembly
The left and right handle assemblies are shipped in rotated positions. The handle assemblies must be removed and rotated
180 degrees for proper setup and assembly.
Page 24 of 29
