Life Fitness ELEVATION 95X Series, Assembly Instructions Manual

Page: 11 / 23

10
2.4 Troubleshooting the Lifepulse System Sensors
If the heart rate reading is erratic or missing, do the following:

Dry the hands if necessary to prevent slipping.

Apply hands to all eight sensors on user arms or bullhorns.

Grasp the sensors fi rmly.

Apply constant pressure around the sensors.
2.5 Recycling the Battery - Explore Consoles Only
When this LIFE FITNESS product is about to be discarded at the end of its useful life, the rechargeable battery must be
removed and recycled. To access the battery, use a medium tip Philllips screw driver to remove the eight screws that
hold the rear cover to the back of the cross-trainer. The battery is located below the control circuit board. To remove
the battery, remove the two wires connected to the battery and the two screws that hold the battery in place. Dispose
of the battery properly.
2.6 How to Obtain Product Service
1. Verify the symptom and review the operating instructions. The problem may be unfamiliarity with the product and
its features and workouts.
2. Locate and write down the serial number of the unit which is located on the back of the unit near the toe guard.
Document the serial number, which consists of three letters followed by six numerals. Write down the software ver-
sion is possible.
3. Contact LIFE FITNESS Customer Support Services via the Web at: www.lifefi tness.com, or call the nearest LIFE
FITNESS Customer Support Services group ( refer to page 1 of this manual) .