STEP 2:
FIGURE 2
5
• Pull back the SPRING PIN on the FRAME (1) and insert the PAD ADJUST (6) as shown in FIGURE 2.
1
6
4
13
16
14
15
3/8 X 66mm FLAT HEAD 8
SPRING PIN
•
SECURELY
assemble the FORMED ANGLE (4) to the FRAME (1) using two 3/8 X 66mm FLAT HEAD BOLTS (8), two 3/8” RH
WASHERS (15), two 3/8” SAE WASHERS (14), two 3/8” LOW HEIGHT LOCK NUTS (13) and two RH CAPS (16) as shown in
FIGURE 2.
•
SECURELY
assemble the HIP PAD ADJUST (2) to the PAD ADJUST (6) using four RH CAPS (16), two 3/8 X 62mm BOLTS (11), four
3/8” SAE WASHERS (14), four 3/8” RH WASHERS (15) and two 3/8” LOW HEIGHT LOCK NUTS (13) as shown in FIGURE 2.
11 3/8 X 62mm
2
