17.
Install bearing housing cap to the end support assembly using a rubber mallet.
Item
Description
Qty.
1
Bearing Housing Cap
1
2
End Support Assembly
1
18.
Install bearing housing cap to the pad mount assembly using a rubber mallet.
Item
Description
Qty.
1
Bearing Housing Cap
1
2
Pad Mount Assembly
1
Cable Routing
1.
Route cable from the lower pulley assembly up through the floating pulley assembly.
2.
Thread cable end through the jam nut and into the rod end bearing a minimum of 12mm.
Item
Description
Qty.
1
Rod End Bearing
1
2
Nut, M10, Hex Jam
1
3
Cable, 116.3" (2955mm)
1
Page 27 of 40
Summary of Contents for Axiom OP-BT
